Frymaster 8030042 Filter Cone 50Pk 11" H 10" Dia For Frymaster Fryer 12 17 Gf14 Gf40 J1C 851127
$ 55.78
$ 55.78
Grab Bars for Bathtubs and Showers, 2 Pack 17.7 inch Shower Handles for Elderly, 3mm Thickened TPE Material Strong Suction Cup, Shower Handicap Grab Bars for Seniors Bathroom Bath Tub Toilet - White
$ 89.94
$ 89.94Nortek GoControl PD300EMZ5-1: Z-Wave Plug-in Dimmer Module 908.42 MHz 120 VAC
5 sold in last 24 hours
- The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).
- This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
- AUTO-SENSE Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on.
- Signal (Frequency): 908.42 MHz Maximum Load: Incandescent: 300W maximum, 120 VAC Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device
- Network wide inclusion One controlled and one pass-through outlet Security beaming POWER REQUIREMENTS 120 VAC, 60 Hz
Tags |
The PD300EMZ5-1 Plug-in Lamp Module is designed to provide Z-Wave control to a connected dimmable lamp. The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times). This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). AUTO-SENSE Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on. SPECIFICATIONS Signal (Frequency): 908.42 MHz Maximum Load: Incandescent: 300W maximum, 120 VAC Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Network wide inclusion One controlled and one pass-through outlet Security beaming POWER REQUIREMENTS 120 VAC, 60 Hz
Important information
300 watts
| Main Specification | |
|---|---|
| Manufacturer | Gocontrol |
| Unit Count | 1.0 Count |
| Control Method | Touch |
| Controller Type | Gocontrol |
| Contact Material | Copper |
| Contact Type | Normally Open |
| Operating Voltage | 1.2e+2 Volts (Ac) |
| Terminal | Blade |
| Circuit Type | 1-Way |
| Actuator Type | Remote |
| UPC | 601818727563 |
| Number of Items | 1 |
| Product information | |
| Package Dimensions | 5 X 3 X 3 Inches |
| Item model number | Pd300emz5-1 |
| Operation Mode | Manual-Automatic |
| Connector Type | Plug In |
| Technical Details | |
| Color | White |
| Item Weight | 5.4 Ounces |
| Mounting Type | Plug In Mount |
| Wattage | 3e+2 |
| International Protection Rating | Ip00 |
| Connectivity Protocol | Z-Wave |
| Brand | Gocontrol |
| Others | |
| Product Type | Electronic Switch |