PneumaticPlus SAR300T-N03BG Air Pressure Regulator, 3/8" NPT, T-Handle
- COMPRESSED AIR REGULATOR WITH GAUGE AND T-HANDLE - Reduces high, uneven compressor pressure to the exact setting your impact wrenches, air ratchets, and mid-size pneumatic machinery need, and holds it steady as demand rises and falls. Set it with the T-handle, then tighten the hex nut beneath to lock it there against vibration.
- SELF-RELIEVING DESIGN, 105 SCFM AT 90 PSIG - When pressure downstream rises past your setting, this compressed air regulator vents the excess to atmosphere instead of holding it in the line, so downstream pressure drops back to your setting instead of staying high at the tools. Adjustable from 0 to 150 PSI.
- AIR LINE REGULATOR, WALL MOUNT OR PANEL MOUNT AT THE POINT OF USE - The included bracket puts it at the workstation, where pressure control is most effective. Install it downstream of a filter, sold separately: rust, pipe scale and other debris in shop air settle on the valve seat, and that shows up as a setting that drifts or will not adjust down.
- 250 PSI MAXIMUM INLET PRESSURE, INCLUDED 0-160 PSI GAUGE - Built for continuous service at the full rated inlet pressure and works across a 23 to 140 degrees F operating range for dependable, repeatable regulation on industrial air systems.
- MADE IN KOREA, BACKED BY A U.S. COMPANY, 1-YEAR LIMITED WARRANTY - PneumaticPlus is a U.S. company headquartered in Carson, California. This air pressure regulator is precision-made in Korea and backed by a one-year limited manufacturer warranty, with customer service provided directly from our California headquarters. Real support from the people who stand behind the product.
| Manufacturer | PneumaticPlus |
| Brand | PneumaticPlus |
| UPC | 841693104121 |
| Number of Items | 1 |
| Material | Aluminum |
| Thread Type | Npt |
| Set Name | Regulator, Gauge, Bracket |
| Part Number | SAR300T-N03G |
| Model | SAR300T-N03G |
| Material Type | Aluminum |
| Thread Style | Npt |
| Item Highlight | Air Compressor Regulator, 105 SCFM, Self-Relieving, 250 PSI Max Inlet Pressure, 0-150 PSI Range, Gauge & Bracket Included See more |
| Product Type | Regulators |
-
Save 10% when you buy two or more items.
-
Get 5% off your next purchase.
-
Enjoy free delivery on orders above $200.
-
Orders are processed and shipped from Washington
3-6 days (Domestic)
Confidence-backed purchases with 30-day return support.
USD |
BRSWKFD3CUHAIHDK |
Category |
Filtration , Compressed Air Treatment , Filters, Regulators & Lubricators , Regulators |
Tags |
Estimated shipping
Select a product to estimate shipping.Unregulated shop pressure costs you twice: run a tool above its rating and you burn air and wear it out faster; run it below and you lose force and speed. The SAR300T-N03BG puts you in control - set your working pressure once with the T-handle, lock it with the hex nut, and it holds there as the compressor cycles on and off, so your tools keep consistent power and speed. It is a self-relieving air regulator: when pressure downstream of it rises past your setting, or when you dial the setting down, the excess vents to atmosphere through the bonnet instead of staying trapped in the line. That means you can lower a setting on a dead-ended line without cracking a fitting to bleed it, and a short hiss when you do is the relief working as designed, not a leak. The 0-160 PSI gauge and mounting bracket are included, and it can be wall mounted or panel mounted at the workstation, adjustable anywhere from 0 to 150 PSI with a 250 PSI maximum inlet pressure. This air line regulator is sized for midsize single-tool work on 3/8" NPT, rated at 105 SCFM measured at 90 PSIG: impact wrenches, ratchets, and nailers. If you need more air, the series scales with port size from 1/4 inch up to 1 inch NPT; size to what your tools actually draw, not to the pipe you happen to have. One honest note: this compressed air regulator controls pressure only - it does not remove water, oil, or particulate. If your air is untreated, add a filter upstream, or step up to a PneumaticPlus filter-regulator to do both jobs in one body. Made in Korea and built to be serviced rather than tossed: rebuild kits are stocked, so a worn unit can be brought back to spec instead of replaced. When you plumb it, follow the flow arrow, seal the port threads with liquid Teflon rather than tape, and avoid over-torquing the port and gauge threads.
Shipping & Delivery
At GofinchKart Australia, we aim to deliver your order quickly and safely.
Domestic Shipping (Australia):
Orders are typically delivered within 3–7 business days.
International Shipping:
Estimated delivery time is 12–26 business days, depending on the destination and customs processing.
Once your order has been dispatched, you will receive a tracking number. Delivery times may vary during public holidays or due to unforeseen delays.